Ohmystinkinheck

DNS stands for Domain Name Server. In technical jargon, the DNS resolves your registered domain names to your hosted account/IP address. For instance, the DNS tells my domain name, www.ohmystinkinheck.com, to look for my website on my server at the IP address, 72.52.163.184.

The DNS can be local or remote. If you register your domain with GoDaddy and then select to use their web hosting for your blog, your DNS will be local (on the GoDaddy server). If however, you register your domain at GoDaddy, but select to host your blog elsewhere, your DNS will be remote (pointed to a different server).

You must point your DNS if you want your web visitors to be able to find your website using your domain name.

Pointing Your DNS

These directions assume that you have registered your domain name at GoDaddy. You can register your domain with any domain registrar, loosely applying the same directives.

If you are hosting your blog at GoDaddy you will not need to point your DNS - this is done automatically for you. If you are hosting your blog with any other web host, the following directions apply.

1. If you have already logged out of your GoDaddy account, log back into your account using the Customer # or Login Name assigned when you registered your domain name.

2. Once logged-in, click on “Domains” (the first green menu bar button at the far left of the web page) to display the drop-down menu. Within the drop-down menu, click on “My Domain Names”. This will take you to the domains registered at your GoDaddy account.

3. Once you are in your Domain Control Center, select your the domain by clicking in the checkbox to the left of the domain name. If this is your first domain registered with GoDaddy there will obviously be only one. If you are pointing several domains to the same Nameserver, you can select multiple domains.

Below you will see that I have registered www.ohmystinkingheck.com. It is a common misspelling of my domain name and so it made sense for me to register it as well.

4. After you check to select a domain or domains, the buttons in the menu bar above the domain names go from shaded to unshaded, making them available to click on. Click on the button that says “Nameservers”.

5. The “Set Nameservers” window will appear. You have three radio button choices available - click on “Custom Nameservers” to assign a remote DNS. Your nameservers are assigned by your web hosting company - not your domain registrar. Look for the nameserver information in the Welcome Letter sent by your web hosting company when you sign up. Normally you will be sent two different nameservers. In this case the nameservers are: NS1.NAMESERVER.COM and NS2.NAMESERVER.COM. Once you key in the nameservers, click “OK” to save the information.

Here and there GoDaddy reformats their pages and so

6. The “Set Nameservers” window will indicate the domain name(s) are being processed for change.

7. Now your domain name is resolving or propagating (Two very big words that basically mean the domain name is looking for your web hosting account.) across the world wide web. DNS changes typically resolve within 24 hours, but can take anywhere from a few minutes to a few days. During this time your domain may be inaccessible via the domain name to some or all web visitors.

While Your DNS Resolves

Though it has been my experience that domains resolve within minutes when using GoDaddy as the registrar and Liquid Web as the web host, there are situations when this is not the case. If you enter www.your-domain-name.com and are still viewing a GoDaddy parked page, then your domain has not yet resolved. Be patient…y’know, since you don’t hardly have any other choice.

Most web hosts, like Liquid Web, will allow you to access your server files using an IP address and your username. In other words, you could key in http://ip-address/~username and be able to view your home page even before the DNS resolves. This is fine when setting up a static website, but believe us when we say that it will be significantly easier for you if you will allow your DNS to fully resolve before installing a self-hosted dynamic blogging platform like Wordpress on your server.

Written by Heather (OMSH) as part of the Ditch Your Blogging Training Wheels lab segment from the Blogher ‘07 Transitioning to a self-hosted blog.

Permanent + Linkage = PERMALINKAGE